BALDR B0389WST4H4-V3 Manual De Usuario página 9

3. When alarm rings, the related alarm mode' symbol will flashing
and ascending "Bibi" alarm sound will last for 2 minutes if no
operation.
MAX AND MIN RECORD
1. Press "MEM" button to check maximum temperature and humidity,
the value will display for 15 seconds.
2. Press "MEM" button second time to check the minimum tempera
ture and humidity, the value will display for 15 seconds.
3. Press "MEM" button third time will return to standard mode.
4. When in max record or min record display mode,press and hold the
"MEM" button to clear the max and min record.
5. Normally, the max and min record will update every 24 hours at 0:00.
TEMPERATURE
1. After power on ,the indoor temperature will display automatically,
it will update reading each 30 seconds and start to receive
outdoor signal which lasts for max 3 minutes.
2. Indoor temperature display range:-10℃~ +50.0℃(14℉~ 122℉);
for temperature lower than -10℃,the reading will be :"LL.L"; for
temperature higher than +50℃,the reading will be :"HH.H".
3. Outdoor temperature display range :-40℃~+60℃(-40℉~140℉);
for temperature lower than -40℃,the reading will be :"LL.L"; for
temperature higher than +60℃,the reading will be :"HH.H".
4. Arrow indication for temperature changes:
will display when the reading increase by 1℃(1.8℉) within one
hour or compared with last reading.
will display when the reading decrease by 1℃(1.8℉) within one
hour or compared with last reading.
OPERATION GUIDELINES
9