Alarm Function; Snooze Function - BALDR B0389WST4H4-V3 Manual De Usuario

ALARM FUNCTION

Alarm Time Setting
1. Press and hold "
2. Press "▲/CH " or " ▼ " button to adjust data; press and hold
"▲/CH " or " ▼ " button will quickly change the value by 8 steps.
3. The setting order is: Hour → Minute→ Exit.
4. Press " " button to skip setting steps or go to the next setting
option.
5. During setting, touch top button to save and exit setting.
6. During setting, if no operation for 20 seconds, it will automatically
save and exit setting.
7. The alarm is default ON after setting the alarm time. Alarm symbol
will display on screen.
Alarm ON/OFF Setting
1. When in time display mode, press "
time. Press "
ON/OFF of symbol
2. When in alarm time display mode, press "
the alarm by the ON/OFF of symbol
3. If no operation for 5 seconds, it will automatically save and exit
setting.

SNOOZE FUNCTION

1. When the alarm is ringing, press any other button except top
button to stop the alarm. And the alarm will restart next day.
2. Or when alarm is ringing, press the top button to activate snooze
function. The alarm will ring again in 5 minutes snooze interval.
And the "
snooze mode. Press any other button except top button to exit the
snooze mode. And the alarm will restart next day.
" button to enter into alarm time setting.
" button again to turn ON/OFF alarm by the
.
" symbol will be flashing on screen to indicate the
" button to check alarm
" button to turn on/off
.
8