Iso (Light Sensitivity) - Medion LIFE X44000 Manual De Instrucciones

ISO (light sensitivity)

This setting changes the sensor's sensitivity to light. A higher value increases light sensitivity
but generates more noise which can have a negative impact on the image quality. It is therefore
important to select the lowest possible ISO value for the conditions.
Settings
ISO AUTO
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
ISO 3200
ISO 6400
NOTE!
If you set the ISO value to ISO 3200 or ISO 6400, the camera will automatically
switch to the resolution 3M.
Measurement – light measurement procedure
This function allows you to determine the area in which light levels are to be measured when
taking photos or making video recordings.
Settings
Multiple
Centre
Sets the sensitivity to ISO 100.
Sets the sensitivity to ISO 200.
Sets the sensitivity to ISO 400.
Sets the sensitivity to ISO 800.
Sets the sensitivity to ISO 1600.
Sets the sensitivity to ISO 3200.
Sets the sensitivity to ISO 6400.
Selects an exposure based on the measurement results at sev-
eral points in the shooting range.
The light of the entire shooting range is measured, but the
values close to the centre are given more significance.
Chooses an exposure based on one single measurement re-
Point
sult in the centre of the image.
Meaning
Automatic ISO value.
Meaning
DE
EN
FR
NL
DK
ES
IT
43