Publicidad
Idiomas disponibles
Idiomas disponibles
This appliance is intended for domestic use and similar applications such as: In staff
kitchens, in shops, offices and other business areas, in agricultural properties, by
customers in hotels, motels and other residential facilities as well as B&Bs. Do not
operate the appliance unattended and check it for damage and proper assembly
before using it each time.
5. Usage
Pull the knob on the lid to lift the lid. Fill the kettle with cold water and press the
lid down until it locks into place.
Note: A scale is provided on the inside. Do not fill the container above the maximum
mark. The boiling water may spurt out if the kettle is overfilled.
1. Place the kettle on the base.
2. Press the "ON/OFF (
ance.
3. A sensor bar is provided on the base station for selecting various water tem-
peratures.
4. Press the respective section of the sensor bar that corresponds to the temper-
ature that you desire. The selected target temperature is now displayed on the
sensor bar for checking.
5. Press the "ON/OFF (
target temperature now starts flashing in the display, and the temperature
attained at present is continuously shown in the illuminated sections of the
display. At temperatures less than or equal to 40°C, the 40°C display glows
constantly. At 60°C the 40°C - 60°C section glows constantly, etc., till the target
temperature is reached.
6. If a target temperature that is less than the current water temperature is
selected, the kettle stops the boiling function immediately, and indicates this by
a long beep.
7. As soon as the water reaches the set temperature, the kettle switches off and
you hear two beeps. The heating element switches off automatically and the
boiling process is stopped. The appliance can now be lifted and the water can
be used.
Note: The kettle saves the last temperature setting.
English
)" button on the base station to switch on the appli-
)" button once again to start the boiling function. The
23
Publicidad
