"Keep Warm" Function - ARENDO 304306 Manual Del Usuario

5.1 "KEEP WARM" function

The "KEEP WARM" function allows you to maintain a set temperature. Press the
"ON/OFF ( )" button on the base station to switch on the appliance. Select
a temperature using the sensor bar. Then press "KEEP WARM ( ) " to start
the process. Following this, the kettle heats to the set value and maintains this
temperature for 2 hours.
5.2 Turning off the key sounds
To turn off the key sounds, press and hold the "ON / OFF ( )" button and the"
KEEP WARM ( )"button simultaneously for about 2-3 seconds. Repeat the pro-
cedure if you want to switch on the key sounds again.
Caution! Some sounds should not be turned off for safety reasons.
6. Descaling and cleaning
We recommend to descale the kettle at regular intervals depending upon the in-
tensity of use. Before cleaning, pull out the power plug and wait until the appliance
cools down completely. The anti-scale filter is located in front of the spout opening.
Open the lid and press the plastic tab of the anti-scale filter down to remove the
filter. Rinse the filter thoroughly using warm water and then replace it back into its
position. When replacing, ensure that the anti-scale filter sits properly in the guide
rail. Please use only commercially available descaling agents based on citric acid to
descale the water container. For the appropriate dosage, please refer to the speci-
fications on the package or insert of the descaling agent. The heating plate should
not be specifically cleaned. Do not use any hard objects on the heating plate. Use
only a damp cloth for cleaning the kettle externally. Do not use any abrasive items
like wire brush or steel sponge for cleaning. Never use any cleaning agents which
may corrode the surface or present a health risk if consumed! Never immerse the
appliance, the power cable or the plug in water or in any other liquid to prevent
risk of electric shock.
24
English