Dialing Back; F You Programmed Your Local Area Code In The Setup Menu - GE 29196 Guia Del Usuario

D
IALING
When reviewing Caller ID records, you can dialback the
numbers shown on the display by pressing the Dial
button.
NOTE: This feature DOES NOT work when the
handset is picked up.
I
F YOU PROGRAMMED YOUR LOCAL AREA
CODE IN THE SETUP MENU
1. Use the Review up and down buttons to display the
number you want to dial.
• If you see a number with 7 digits (i.e. 555-1234),
then the call was received from within your area
code. However, this does not guarantee the call is a
local call.
• If you see a number with 11 digits (i.e. 1-234-555-1234),
then the call received was not from your area code.
2. Press the Dial button and the display shows PICKUP
or ADJ . A 10 second timer will also start at this point
on the upper right side of the display, letting you
know the time until the unit will return to the Caller
ID record. If you adjust the number to be dialed, the
timer will reset after each adjustment.
20
B
ACK