Wall Mount Installation - GE 29196 Guia Del Usuario

W M
ALL
Your phone can be mounted on a wall plate (not
included).
1. Plug the short line cord into the jack on the bottom
of the base and connect the other end to a modular
jack.
2. Feed the short line cord through the grooves
provided so that the base area is flat and ready to
mount on the wall.
3. Slip the mounting holes of the base (on bottom of
unit) over the wall plate posts and slide the base
down until the phone is firmly in place.
4. Plug the coiled cord into the handset. Plug the other
end into the jack on the lower end of the base.
5. Set the RINGER switch on the base to HI.
• HI = Sound will be loudest
• LO = Sound will be lower.
• OFF = Telephone will not ring.
6. Place the handset in the base.
6
4
I
OUNT NSTALLATION
2
3
1
OFF LO HI
RINGER
4
VOLUME
11