GE 29196 Guia Del Usuario página 9

1. If both the straight and coiled line cords are already
connected, disconnect them from the base unit.
Place the handset off to the side.
2. Loosen the screw on the battery door and slide in
the direction of the arrows.
3. Insert 3 AA-size alkaline batteries in the battery
compartment.
4. Replace the battery compartment doors securely.
5. If the cords were previously connected, re-attach
the line cords to the unit and check your memory
locations.
NOTE: If the low battery icon
display, you need to replace the batteries. It is
important that you replace the batteries as soon as
possible in order to maintain Caller ID operation.
During the replacing of batteries, a backup circuit
in the unit will retain your stored information for
up to 60 seconds. Write down any stored
information you do not want erased.
IMPORTANT: If you're not going to use the
telephone for more than 30 days, remove the
batteries because they can leak and damage the
unit.
appears in the
9