T O Use Pause - GE 29196 Guia Del Usuario

T U P (R )
O SE AUSE EDIAL
The Redial button becomes a pause function when the
Store button has been pressed first. It is valid only
when storing a number into memory locations.
Use the Pause (Redial) button to insert a pause when a
delay is needed in an automatic dialing sequence. For
example, when you must dial a 9 to get an outside line
or when you enter codes to access you long distance
company.
You may need to adjust the length of the pause
duration. It can be adjusted from 1 to 9 seconds. The
default setting is 4 seconds.
1. Pick up the handset.
2. Press the Store button.
3. Press 1-9 (1=1 second, 2=2 seconds, etc.)
4. Press Store again.
5. Press the Pause (Redial) button to save.
29