T O Set The Regional Area Code - GE 29196 Guia Del Usuario

T S
O ET THE
The telephone may enter multiple Local/Regional Area
Codes (L/RAC) to assist in 10 digit call determination
for the Dial back feature. This feature is required in
regions that have multiple L/RAC's which are requires
to have 10 digit dialing between them.
1. After the unit enter the setup menu, press the
Review up button until REGIONAL AC'S appears.
2. To enter or change the area code stored, press the
Option button. The display shows the present
regional area code stored. The left-most digit or a
minus sign(-) flashes, indicating it is ready to accept
the regional area code entry.
3. Press Review down to choose 9-0 for the first digit.
4. When the desired digit is flashing, press Review up
to advance to the next digit.
5. Repeat steps 3 and 4 unit all the digits for the
regional area code are correct.
If you make a mistake, you can simply retrace the
previous steps until the needed regional code is set.
(There are total 6 sets regional area code).
6. Press Option to store the regional area code and
return to the REGIONAL AC'S display.
14
R
EGIONAL
A C
REA ODE