Kohler K-2804 Guia De Instalacion página 5

Backsplash
Countertop
Locator Line Faucet
Backsplash
2" (5cm)
Min.
Countertop
Cut-Out
Template
2. Install the Lavatory
Self-Rimming Installations
Cut out the opening by carefully following the pencil line traced
from the template.
CAUTION: Risk of personal injury or product damage. Cast
iron lavatories are very heavy. Get help lifting the lavatory into
place.
Temporarily position the lavatory in the countertop cutout so the
"Kohler" logo is to the back. Adjust to fit.
Remove the lavatory.
Drill the faucet holes.
Install the faucet and drain according to the manufacturer's
instructions.
Clean the countertop, and carefully position the lavatory in the
countertop opening so the "Kohler" logo is to the back.
Apply a thin, continuous bead of sealant around the lavatory
edges.
Immediately wipe away any excess sealant, and fill any voids as
needed.
Verify that the lavatory has not moved out of position.
Allow the sealant to cure at least 30 minutes before proceeding.
Kohler Co.
Spout
Centerline
Centerline
Cut-out
Line
1/4"
(6mm)
Min.
2" (5cm)
Min.
5
Backsplash
1" (2.5cm)
Minimum
Clearance
Outside
Edge of
Lavatory
1018375-2-A