General Motors 17800780 Manual Del Usuario

PERFORMANCE
GM
PARTS
Colorado and Canyon Exhaust System
Specifications
Specifications Part Number 17800780;
17800781; 17800782; 17800783
Thank you for choosing GM Performance Parts as your high
performance source. GM Performance Parts is committed to
providing proven, innovative performance technology that is
truly....more than just power. GM Performance Parts are engi-
neered, developed and tested by the factory to exceed your
expectations for fit and function. To contact us call 1-800-GMUSEUS
for the GM Performance Parts Authorized Center nearest you or
visit our website at www.gmgoodwrench.com.
This publication provides general information on components and
procedures that may be useful when installing a Colorado and
Canyon exhaust system. Please read the entire publication before
starting work.
Observe all safety precautions and warnings in the service manuals
when installing the Colorado and Canyon exhaust system in your
vehicle. Wear eye protection and appropriate protective clothing.
When working under or around the vehicle support it securely with
jack stands. Use only the proper tools. Exercise extreme caution
when working with flammable, corrosive and hazardous liquids and
materials. Some procedures require special equipment or skills. If
you do not have the appropriate training, expertise and tools to
perform any part of the installation safely, this work should be done
by a professional.
The information contained in this publication is presented without
any warranty. All the risk for its use is entirely assumed by the user.
Specific component design, mechanical procedures and the quali-
fications of the individual readers are beyond the control of the
publisher, and therefore the publisher disclaims all liability incurred
in connection with the use of the information provided in this
publication.
Chevrolet, the Chevrolet Bow Tie Emblem, General Motors, and GM
are all registered trademarks of the General Motors Corporation.
Chevy is a trademark of the General Motors Corporation.
Minimum Required Tool List
Tools:
3/8" Drive Ratchet
3/8" Drive Extension 3"
15mm Socket
15mm combination wrench
Pry Bar
Shop Supplies:
Spray Lubricant
Colorado and Canyon Exhaust System
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GMSPO SPECIFICATIONS.
GM Performance Colorado & Canyon Regular Cab Touring
Description
1. Front pipe assembly
2. Muffler assembly
3. Tail pipe assembly, all applications 19155021
4. 2.50" clamp
5. Flange, 2-bolt
6. Nut, M10 X 1.50p
7. Bolt, M10 X 1.50p
8. Instruction manual (not shown)
REV14DE06
PART NO.
DATE REVISION
10AU05 I
14DE06 R
GENERAL MOTORS
SERVICE PARTS OPERATIONS
6200 Grand Pointe Drive, Grand Blanc, MI 48439
Exhaust System Components
Part Number 17800780
Part Number
19155017
19155020
19131257
19155034
11514597
11515767
19131552
19131552
PAGE
Quantity
1
1
1
2
1
2
2
1
1 12
OF
AUTH