Fein CCG 18-125 BL SELECT Manual De Instrucciones página 23

Character
n
P
1
P
2
U
f
M...
Ø
L
pA
L
wA
L
pCpeak
K...
h,AG
h,DS
For your safety.
Read all safety warnings and all
WARNING
instructions. Failure to follow the
warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
Do not use this power tool before you have
thoroughly read and completely understood this
Instruction Manual and the enclosed "General
Safety Instructions" (document number
3 41 30 054 06 1). The documents mentioned should
be kept for later use and enclosed with the power tool,
should it be passed on or sold.
Please also observe the relevant national industrial
safety regulations.
Unit of measurement,
international
-1
/min, min , rpm,
r/min
W
W
V
Hz
mm
mm
mm
mm
mm
kg
kg
kg
dB
dB
dB
2
m/s
2
m/s
2
m/s
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2
min, m/s
Unit of measure- Explanation
ment, national
rpm Rated speed
W Power input
W Output
V Rated voltage
Hz Frequency
mm Size of metric thread
mm Diameter of a round part
mm Ø
Ø
T=Thickness of grinding/cutting disc
mm Ø
mm M=Thread for clamping flange
l=Length of mounting thread
kg Weight according to EPTA-Procedure 01
kg Weight of the power tool without battery
and application tool
kg Weight of the battery
dB Sound pressure level
dB Sound power level
dB Peak sound pressure level
Uncertainty
2
m/s Vibrational emission value according to
EN 60745 (vector sum of three directions)
2
m/s Mean vibrational value for angle grinding
2
m/s Mean vibrational value for sanding with sand-
ing sheet
m, s, kg, A, mm, V, Basic and derived units of measurement from
W, Hz, N, °C, dB, the international system of units SI.
2
min, m/s
Intended use of the power tool:
Hand-guided, battery-operated angle grinder for dry
grinding, wire brushing and cutting of metal and stone
in weather-protected environments with the applica-
tion tools and accessories recommended by FEIN.
Safety Warnings common for Grinding, Sanding,
Wire Brushing or Abrasive Cutting Off Operations
This power tool is intended to function as a grinder,
sander, wire brush or cut-off tool. Read all safety warn-
ings, instructions, illustrations and specifications pro-
vided with this power tool. Failure to follow all
instructions listed below may result in electric shock,
fire and/or serious injury.
Operations such as polishing are not recommended to
be performed with this power tool. Operations for
which the power tool was not designed may create a
hazard and cause personal injury.
=Max. diameter of grinding/cutting disc
D
=Diameter of mounting hole
H
=Max. sanding pad diameter
D
en
23