Moving The Wet/Dry Vac; Blowing Feature - RIDGID WD16800 Manual Del Usuario

SP6779-3 Ridgid WD1680 ES
Operation (continued)

Moving the Wet/Dry Vac

Should it become necessary to pick the
Vac up to move it, the handles on the
sides of the dust drum are used to lift.
To maneuver the Vac, the handle above
the inlet can be used.

Blowing Feature

Your Wet/Dry Vac has a "detachable
blower." It has the capability to be used
as a dedicated blower for yard work,
patio cleanup, and garage applications to
blow dust and other debris.
WARNING: Always wear safety
!
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
using as a Blower.
WARNING: To reduce the risk of
!
injury to bystanders, keep them
clear of blowing debris.
CAUTION: Wear a dust mask if
!
blowing creates dust which might
be inhaled.
CAUTION: To reduce the risk of
!
hearing damage, wear ear protectors
when using the Vac/Blower for
extended time or in a noisy area.
9/20/12 12:05 AM Page 12
1. Familiarize yourself with the detachable
blower portion of your Wet/Dry Vac.
2. Remove the detachable blower of
your Vac by pressing down on the
detachable blower latch under the
handle of the detachable blower and
lift by the handle to remove.
Detachable
Blower
Latch
12
Detachable
Blower Handle
Detachable
Blower
Molded
Leads