For "Blowing - RIDGID WD16800 Manual Del Usuario

SP6779-3 Ridgid WD1680 ES
Operation (continued)
Using the Detachable Blower

for "Blowing"

Two suggested methods of using the
blower are:
1. Insert the round end of the blower wand
into the blowing port of the detachable
blower and turn clockwise to lock.
- OR -
2. The Wet/Dry Vac may also be used for
blowing using the seven-foot hose
supplied with the Wet/Dry Vac. Install
the push button end of the Vac hose in
the blowing port of the detachable
blower. For added control, an
extension wand and/or car nozzle can
be added to the opposite end of the
hose. The unit is ready for blowing
applications.
9/20/12 12:05 AM
3. Turn the blower "ON" by sliding the
Goggles
Dusk Mask
Blowing
Port
TURN CLOCKWISE
TO LOCK
Blower
Wand
13
Page 13
switch in the handle of the blower to
the "I" position.
Car Nozzle
Male-Male
Adapter