Cequent Performance Products 75540 Instrucciones De Instalación página 7

Install M12 bolts and conical washer as shown. Hand tighten. Check to assure hitch is
centered on vehicle.
Tighten all M10 fasteners with torque wrench to 53Lb.-Ft. (72 N*M) and M8
fasteners to 27Lb.-Ft. (37N*M)
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Trim appearance panel (2 places) as shown. Obtain vehicle owner's approval before
cutting appearance panel.
©2016 Cequent™ Performance Products, Inc. - Printed in Mexico
7.5"
Attach the exhaust hanger to the bracket of the hitch as shown, with the existing M8
bolts and new conical washers and nut from fastener kit. Torque all fasteners to
specifications.
Reinstall appearance panel. Note: slide rear of panel in place first for ease of
installation.
Sheet 7 of 21 75540NP 2-23-16 Rev. B