SSS Siedle ACCESS AHTV 870-0 Informacion De Producto página 7

Die Türöffner-Funktion ist fest der
Schlüsseltaste zugeordnet.
Alle anderen Tasten des Gerätes sind
frei programmierbar und können
doppelt belegt werden. Diese
Programmierung wird am Server
vorgenommen.
SD-Karte
Auf der Geräteoberseite ist eine
Blind-Karte als Staubschutz in einen
SD-Karten-Slot eingesteckt. Bei einer
nachträglichen Funktionserweiterung
kann hier eine Speicherkarte einge-
baut werden.
Zubehör für AZTV 870-...
AZTV 870-... Tischzubehör für
die Umrüstung von Wandgerät zu
Tischgerät.
Technische Daten
Versorgung des Gerätes über PoE
(Klasse 2)
Klingellautstärke: max. 83 dB (A)
Farbdisplay: 8,8 cm
Auflösung: 320 x 240 Pixel
Eingang für Etagenruf ERT
(potentialfrei)
Potentialfreier Kontakt:
max. 30 V, 1 A
Abmessungen (mm) B x H x T:
105 x 277 x 45
English
Application
Access in-house telephone video
with door release button and 7
additional buttons with 2-colour
status LED. All buttons are freely
programmable. The display shows
the camera image and the graphic
menu interface.
With the functions calling, speech,
door release, vision, light, remote
switching and call silencing.
Performance features:
• Display 8.8 cm
• Entrance for storey calls
• Exit freely programmable
• Call differentiation between door
calls, storey calls and indoor calls
• Switching functions
• Status indications
• Video memory function
• Integrated 5-way control button
• Can be used with table-top acces-
sory AZTV 870-... as a table-top
device
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
Electrostatic charging
As a result of electrostatic charging,
direct contact with the circuit board
can result in destruction of the
device. Direct contact with the circuit
board must therefore be avoided.
Scope of supply
• AHTV 870-... (Base plate and
housing with circuit board)
• Receiver
• No-tangle cord
• Two RJ45 plugs
• Dummy card for SD card insert
• Operating instructions for the
end user
• This product information
Mounting
1 Recommended mounting height
appr. 1.65 m to display height/
viewing height.
2 Open the device from the back
by releasing the base plate with the
locking lever.
3 Align the base plate centrally rela-
tive to the flush mounted socket and
mark the fixing holes.
4 Insert the provided RJ45 plug on
the adapter circuit board. Fasten
the base plate directly on the wall
using 4 screws, paying attention that
the plate is the right way up (top
marking).
5 Insert the coloured plug of the
no-tangle cord into the socket at the
housing. A distinct click is audible
when the plug is correctly inserted.
6 Insert the other end of the no-
tangle cord in the receiver until
the plug clicks audibly into place.
This connection can no longer be
detached.
7 Hook the housing into the base
plate from above and close by
exerting a slight pressure.
Dismantling
8 To remove the housing, press
the lock upwards using a flat blade
screwdriver. The circuit board and
receiver remain on the upper part of
the housing.
Lettering
9 The lettering panel can be
inscribed to indicate the button
functions. The see-through panel
can be lifted at the side.
A marking template is provided in
the download area of our website.
3