Publicidad
Idiomas disponibles
Idiomas disponibles
storage
stOrInG YOur pOrtaBle aIr tanK
Turn the RED OPEN/CLOSE KNOB CLOCKWISE to the
CLOSE position when storing your air tank.
WarnInG
Failure to remove condensation will cause the tank to rust
prematurely.
Always drain the tank of all air after the last use for the day
and before repairing or removing any component parts.
Point the safety pressure relief valve AWAY FROM YOUR
BODY when releasing air. Use the pull ring on the safety
relief valve to vent any pressure inside the tank before
attempting to service the tank. Safety goggles must be
worn at all times for eye protection. To disperse any
accumulated condensation inside the tank, begin by
parts list
1. Carry Handle
2. pressure Gauge
Indicates internal air pressure of tank.
3. Open/Close Valve
Prevents air from leaking out of the air hose and/or tire
chuck, when in the close position.
4. Filler Valve
Fill tank with compressed air through this point.
5. safety pressure relief Valve
Prevents tank from being over-pressurized.
6. air Hose
Delivers compressed air from the tank.
7. steel legs
Support tank in an upright stable position.
8. tire Chuck
Used to inflate tires and other items.
replacement parts
Item no(s).
part no.
2
E103747
3, 4, 5
E100177
6, 8
E104701
For replacement parts call 1-888-895-4549
limited Warranty
If within two years from date of purchase, this Husky product
fails due to a defect in materials or workmanship, return the
product to any Home Depot retail store with a receipt indicating
proof of purchase for free repair (with replacement if repair is
possible). This warranty only applies for 90 days from the date
of purchase if this product is ever used in a commercial or rent-
al application. This warranty excludes incidental/inconsequen-
tial damages and failures due to misuse, abuse or normal wear
Description
Qty.
Pressure Gauge
1
Manifold Assembly
1
Air Hose w/Chuck
1
reducing the air pressure inside the tank by pulling out on the
safety valve and holding until the tank gauge reaches 25 psi.
Invert the tank with the manifold facing downward and pull the
ring on the safety relief valve. We as the
manufacturer and you as the consumer have no control
over the moisture content of air coming from any fill
source. Premature rusting caused by condensation inside
the tank is the primary reason for the suggested
replacement date stamped on the tank.
• Never attempt to remove any components while tank is
pressurized.
• Never remove or deface the information sticker on tank.
• Never attempt to fill the tank if any air leak is detected
in the tank body. Discontinue use of the air tank
immediately.
• Warranty is void if any attempt is made to alter or change
the design of the tank.
4
3
5
6
and tear. This warranty gives you specific rights, and you may
also have other rights, which vary from state to state. Please
see store or call 1-888-859-4549.
1
2
7
8
Publicidad
