BEARWARE 303715 Manual Del Usuario página 24

Image
9. Stored data
Maximum and minimum values
Press the "MAX/MIN" button in default screen to view the maximum indoor
and outdoor temperature, the maximum and minimum humidity as well as the
maximum and minimum air pressure. "MAX" appears at the bottom right of
the display. Press the "MAX/MIN" button again to view the minimum measured
values. "MIN" appears in the display. After about 20 seconds, the current reading
is shown.
Note: The min/max temperatures are measured from the total operating time of
the weather station. Unless you have enabled the 24-hour clear function in the
basic settings. In this case, the readings are reset after 24 hours.
Note that you can not make any other settings or press any buttons while
displaying the "MAX" or "MIN" values.
24
Meaning
Cloudy: The air pressure reduces and the previous state
is partly cloudy, or the air pressure increases and the
previous state is rainy.
Rainy: The air pressure reduces and the previous state
is cloudy.
Storm: The air pressure reduces and the previous state is
rainy. The cloudy and rainy symbols start flashing.
English