Height Adjustment; Cord Management - PEERLESS Practico FPZ-640 Instalación Y Montaje

Place Adapter Plate on Adjustable Column
Slide adapter plate onto adjustable column (A) as shown in fi gure 6.1. Reinstall nut and bolt on back of adapter
6
plate using a 1/2" socket wrench as shown in fi gure 6.2. Reinstall screw and washer on top of adjustable column
(A).
Figure 6.1

Height Adjustment

Loosen adjustment knob and remove bolt. Adjust
7
column to desired height. Insert bolt back into
column (A) and tighten adjustment knob.
adjustment knob
A
bolt
5 of 18
Figure 6.2

Cord Management

Cords may be routed through column (A) as shown.
8
ISSUED: 03-29-10 SHEET #: 009-9042-2 07-21-10