Kohler K-6354 Guia De Instalacion página 4

3. Install the Faucet
- If you have not already done so, move the faucet into the install
position.
- From the underside of the sink, position the bracket, washer, and nut
onto the mounting stud. Position the faucet and escutcheon on the
sink to obtain the desired alignment. Tighten the nut securing the
faucet to the sink. For best access, use a ratchet wrench with 7/16"
deep socket.
NOTE The weight must be installed to act as a pull stop, and to
:
prevent kinking damage to the hose.
- For best performance, attach the weight to the hose 23" (58.4cm)
from the loose end of the hose. The weight may be moved to adjust
the pull-out length of the hose. Carefully tighten the weight screws.
Do not overtighten.
- Reconnect the hose to the hose connector.
4. Attach the Spray Hose (if applicable)
- Apply a bead of plumbers putty or other sealant to the hose guide
according to the putty manufacturer's instructions.
- Insert the hose guide into the hole at the far right end of the sink.
Attach and tighten the hose guide nut.
- Insert the spray hose end through the hose guide from the top.
- Secure the hose to the external threads on the spray tube.
A
1025491-2-
Bracket
Washer
Nut
4
Spray
Guide Nut
Spray
Tube
Spray Hose
Apply
Plumbers
Putty Here
Kohler Co.