Assembling; Use And Operation - Klarstein 10020774 Manual De Usuario

The machine has a safety protection device. Electrical operation is not possible if the blade-cartridge/moun-
ting-ring/glass-pitcher have not tightly been assembled or if this assembly is not securely fastened to the
blender base.
• Clean all the parts which will touch with food.
• Please make sure the power plug you used is consistent with the one used for this machine.
• Place the machine on a smooth surface, in case any accidents.
• Put the raw materials into blender jar, add some water according to personal preference (but no more than
maximum scale), then put the blender cover on and put the top cover on the feeding hole.
• While connecting the power, turn on the switch, blender will start working, the food under processing will
be crushed and dissolved completely after 60 seconds, then a cup of good taste, fresh juice will be ready.
Note: if the machine is running idle, that is, the food is not able to fall to the blades, please turn down and
switch off the machine. Use the hand held safety spatula provided with your blender and loosen the food from
the jar walls. You may then resume blending.

Assembling

Use and Operation

8