Kohler K-528 Guia De Instalacion página 7

Outlet
Power Cord
Outlets
Supply Inlets
2. Preparation
NOTICE: If the digital valve will be used for a bath/shower application, the bath fill supply line must be
routed from the #1 outlet port.
NOTE: The two valve interfaces are identical. Either can be used for primary and secondary connections.
One is located outside the showering enclosure, while the other is located inside the showering enclosure.
Determine all required components along with their installation locations before beginning this
installation.
When routing piping, keep in mind the numbers marked at each valve outlet must correspond to
the appropriate showering component for the preprogrammed or custom showering experiences to
function properly.
Kohler Co.
Interface
Drip
Loop
NOTE: Only one interface, installed inside the shower, is required.
An additional interface can be installed outside the shower.
7
Interface
Coupler
Drip Loop
20' (6.1 m) Cables
1145587-2-A