I F You Did Not Program Your Local; Call Waiting Caller Id - GE 29460 Manual Del Usuario

I
F YOU DID NOT PROGRAM YOUR LOCAL AREA CODE IN THE SETUP MENU
1. Use the SHUTTLE knob to display the number you want to dial. You will
only see 10-digit numbers (i.e. 234-555-1234).
2. Press DIAL to dial back. You may adjust the number format if TURN TO
SELECT shows in the display.
C W
ALL AITING
This feature allows you to see who is calling when you hear the call
waiting beep. The caller identification information appears in the display
after you hear the tone.
• Press the FLASH button to put the person to whom you're talking on
hold and answer the incoming call.
IMPORTANT: In order to use this unit, you must subscribe to either the
standard Name/Number Caller ID Service or Caller ID with Call Waiting
Service. To know who is calling while you are on the phone, you must
subscribe to Caller ID with Call Waiting Service.
28
C ID
ALLER