Ait For; Setting The Regionala - GE 29460 Manual Del Usuario

S W
ETTING THE
If you observe clicking noises right after dialing, the time the phone waits
before a busy tone is heard for Automatic Busy Redialing may be lengthened.
The default is 0.5 seconds.
1. Press the MENU button.
2. Use the SHUTTLE knob to scroll to SETTINGS .
3. Press SELECT.
4. Use the SHUTTLE knob to scroll to ABR DELAY .
5. Press SELECT.
6. Use the SHUTTLE knob to scroll to the desired setting.
7. Press SELECT to confirm. If you want to start over, press EXIT to return
to ABR DELAY menu.
S R
ETTING THE
Depending on your area, you may need to set regional area codes. These
are needed in order for the phone to determine the number format to be
displayed when a valid Caller ID signal is received. Calls received that
match any of the regional area codes are displayed as 10 digits. If the
number is not displayed correctly, the phone may not be able to dial back
the number properly. You can store up to 6 regional area codes.
You may need to use this feature if you have:
• Multiple area codes
• Overlapping area codes
• Areas that require 10-digit dialing.
B

AIT FOR

USY
A
EGIONAL REA
T D
ONE ETECT
C
ODES
T
IMING
39