Installation Options; Desktop Installation - GE 29460 Manual Del Usuario

I
NSTALLATION
Although you can use your 2-line telephone with a single phone line, you
must have two lines (separate phone numbers) to use a two-line system.
Two possible set ups are described in Desktop and Wall Mount Installation.
A Single Line on a Modular Jack
If you want to only connect one line, plug one of the telephone line cords
into the LINE 1+2 jack and into a single modular phone jack. Your phone
will only use line 1 with this connection. Line 2 will not be used.
D I
ESKTOP NSTALLATION
Two Lines on a Single Modular Jack
1. Plug one end of the handset cord into the handset and the other end
into the jack on the side of the base. Place the handset in the base.
2. Plug the power supply cord into the POWER 6V AC jack on the base and
into an AC outlet.
3. Plug the gray telephone line cord into the LINE 1+2 jack on the base and
into a dual line modular jack. For single line use, See "A Single Line on a
Modular Jack. "
NOTE : The phone automatically defaults to touch-tone dialing. To change to
pulse (rotary) dialing, see "Tone/Pulse Dialing." If you don't know which type
of service you have, check with the phone company.
CAUTION: Use only the ATLINKS USA 5-2495 power supply that is
compatible with this unit. Using other power supplies may damage the unit.
8
O
PTIONS
LINE 1+2 jack
3
2
1