Using Grass Bag; Figure 6; Discharge Tunnel - Toro Recycler 59192 Manual Del Usuario

Operation

Using Grass Bag

1. Stop the engine and wait for all moving parts to
stop.
2. Ensure discharge door handle is fully forward
and pin is engaged in catch (Fig. 6).
1
3

Figure 6

1. Bag frame on retaining
post
2. Pin contacting latch plate
3. INSTALLING BAG—Slide hole in bag frame
onto retaining post on discharge tunnel (Fig. 6)
and set rear of bag frame onto lower handle.
4. Pull discharge door handle forward until pin
clears ramp on bag door and move handle
rearward until pin locks in bag notch (Fig. 7).
Discharge door in mower housing is now open.
4
2
1912
3. Handle fully
forward–discharge door
closed
1
Figure 7
1. Pin in bag notch
5. EMPTYING BAG—Stop engine and wait for all
moving parts to stop. Lift discharge door handle
straight up and move it forward to contact latch
plate (Fig. 6). Grasp bag frame handle and rear
of grass bag and lift bag off mower. Gradually
tip bag forward to empty clippings.
6. To reinstall bag, repeat steps 2–4.
POTENTIAL HAZARD
Grass clippings and other objects can be
thrown from an open discharge tunnel.
WHAT CAN HAPPEN
Objects thrown with enough force could
cause serious personal injury or death to
operator or bystander.
HOW TO AVOID THE HAZARD
Never open door on discharge tunnel when
engine is running unless the grass bag,
optional side discharge attachment or
discharge tunnel plug is securely installed.
1913