Beem BASIC SELECTION Manual De Instrucciones página 32

Ocultar thumbs Ver también para BASIC SELECTION:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN
WARNING - Danger of Scalding
Avoid coming into contact with the rising steam. Do not open the water tank lid during the
brewing process.
Do not open the fi lter compartment during the brewing process. The fi lter insert and the
permanent fi lter will become hot during use.
Be careful when removing the fi lter insert after operating the device. There may still be hot
water remaining in / on the fi lter insert or permanent fi lter! Always allow the fi lter insert and
the permanent fi lter to cool down fi rst before they are removed / cleaned.
Never pour water into the water tank when the device is switched on or during the brewing
process. Allow the device to cool down before fi lling it again.
Do not move the device during the brewing process.
The coffee which is prepared is hot! Be careful when handling hot liquids.
WARNING – Danger of Fire
Do not use the device in rooms containing easily ignitable dust or poisonous and explosive fumes.
Do not connect the device along with other devices (with a high wattage) to a multiple socket
in order to prevent overloading and a possible short circuit (fi re). Do not use the device in
conjunction with extension cables.
Do not operate the device in the vicinity of combustible material. Do not place any combus-
tible materials (e.g. cardboard, paper, wood or plastic) in or on the device.
Do not cover the device during operation.
NOTICE – Risk of Damage to Material and Property
The device should only be used if it has been correctly assembled! Before each use, check
whether the fi lter insert and the permanent fi lter are inserted correctly and whether the
water tank is fi lled correctly!
Lay the mains cable in such a way that it does not become squashed or bent and does not
come into contact with hot surfaces (also applies to the hot surfaces of the device!).
Switch off the device and pull the mains plug out of the plug socket if an error occurs during
operation, when there is a power cut or before a thunderstorm.
Never pull or carry the device by the mains cable. When you pull it out of the socket, always
pull on the mains plug and never the mains cable!
Protect the device from other heat sources, naked fl ames, sub-zero temperatures, persistent
moisture, wet conditions and impacts.
Use only original spare parts from the manufacturer in order to guarantee that there is no
interference that may prevent the device from working and prevent any injuries.
03201_DE-EN-FR-ES-IT_A5_V2.indb 26
03201_DE-EN-FR-ES-IT_A5_V2.indb 26
26
31.01.2019 11:57:02
31.01.2019 11:57:02

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido