Beem BASIC SELECTION Manual De Instrucciones página 37

31
If the brewing process is to be aborted prematurely, press the
lamp goes out and the device is switched off.
At the end of the brewing process, you will hear three beeps,
device automatically switches on the hotplate (see the "Handling and Operation" chapter – "Hot-
plate").
The hotplate switches off automatically after 35 – 40 minutes and the device switches to stand-by
mode. The operating lamp
Making Coffee with Coffee Powder
1. If necessary, fi ll the water tank (6) with water (see the "Handling and Operation" chapter –
"Filling the Water Tank").
2. Open the fi lter compartment (11) by pressing the release button for the fi lter compartment (4).
3. Insert the permanent fi lter (10) or a basket fi lter paper (see the "Handling and Operation"
chapter – "Inserting the Filter").
4. Add the quantity of coffee powder you want to the fi lter using the measuring spoon which is
supplied with the device or another suitable spoon. We recommend one heaped spoon for
each 125 ml cup.
5. Close the fi lter compartment.
6. Set the desired number of cups with the button
tion" chapter – "Setting the Number of Cups").
7. Set the coffee strength you want with the button
ation" chapter – "Setting the Coffee Strength").
8. Press the button
the display (15) shows
If the brewing process is to be aborted prematurely, press the
lamp goes out and the device is switched off.
At the end of the brewing process, you will hear three beeps,
device automatically switches on the hotplate (see the "Handling and Operation" chapter – "Hot-
plate").
The hotplate switches off automatically after 35 – 40 minutes and the device switches to stand-by
mode. The operating lamp
03201_DE-EN-FR-ES-IT_A5_V2.indb 31 03201_DE-EN-FR-ES-IT_A5_V2.indb 31
goes out.
( (16) to start the brewing process. The operating lamp lights up and
. Hot water is poured over the coffee powder to brew it.
goes out.
button. The operating
goes out on the display.
goes out on the display and the
(19) (see the "Handling and Opera-
(20) (see the "Handling and Oper-
button. The operating
goes out on the display.
goes out on the display and the
EN
31.01.2019 11:57:03 31.01.2019 11:57:03