Troubleshooting; Service And Repairs - Stanley FatMax FME140 Manual De Instrucciones

• Unit will not start.
Problem
For assistance with your product, visit our website at www.stanleytools.com. for a list of
service centers, or call the Stanley FatMax Customer Care Center at (800) 262-2161
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
MAINTENANCE
tool; never immerse any part of the tool into a liquid.
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order parts, visit our service website at
www.stanleytools.com. You can also order parts from your nearest Stanley FatMax Factory
Service Center or Stanley FatMax Authorized Warranty Service Center. Or, you can call our
Customer Care Center at (800) 262 2161.

SERVICE AND REPAIRS

TROUBLESHOOTING

• Cord not plugged in.
Possible Cause
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
• Plug tool into a working outlet.
Possible Solution
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a Stanley FatMax
service center or authorized
servicer.)
• Reset circuit breaker. (If the
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a
StanleyFatMax service center
or authorized servicer.)
• Have cord or switch replaced
at a Stanley FatMax Service
Center or Authorized Servicer
8