Customer Service; Legal Requirements - Continental ContiConnect Bluetooth Kit Instalación

Step 3: Initialization and configuration of the ContiPressureCheck system
1. Make sure that the ContiConnect Bluetooth Dongle is paired with your Android device, the
ContiConnect Driver app is started and an active connection with the dongle is established
(the LED is permanently lit blue).
2. Follow the instructions for initializing and configuring the ContiPressureCheck system
according to the manual for the handheld reader. This can be downloaded from
EN
www.contipressurecheck.com/downloads. In case the ContiConnect Bluetooth Dongle has
been connected to an existing ContiPressureCheck system that has already been used, a
complete initialization will not be necessary. In this case, check the CAN setting used
previously and change it to J1939 if needed.
3. Connect the powered Continental handheld reader to the diagnostic connector of wiring
harness K as soon as the handheld reader prompts you.
4. After the configuration is successfully completed, restart all devices and the app by turning
off the car ignition and restarting your Android device or app.
5. After restarting, the app will display the vehicle diagram and the system will be ready for use.
NOTE: It is mandatory that the ContiPressureCheck system be configured according to CAN bus
format J1939.
14

Customer Service

If you have any technical questions regarding the system, please contact your Continental contact
person. For more information, visit www.conticonnect.com.
Disposal
Do not under any circumstances dispose of this product as household waste. Electric/
electronic components must be disposed of as used electric and electronic devices in
accordance with Directive 2012/19/EU. Direct any questions you may have to your
ContiPressureCheck dealer or your Continental distribution partner.

Legal Requirements

The ContiConnect Bluetooth Dongle complies with the legal requirements of the following
directives:
• Radio Interference (Electromagnetic Compatibility) of Vehicles Directive 72/245/EEC in version
2006/96/EC
• Directive 2014/53/EC on radio equipment and telecommunications terminal equipment and the
mutual recognition of their conformity
• FCC Part 15 Subpart B (per ANSI C63.4: 2014) and Industry Canada ICES-003 Issue 6, April 2017
for a Class B Device
The ContiConnect Bluetooth Dongle is an assembly with EC type approval. This device may be
used in the EU. The EU declaration of conformity can be viewed at the following website:
www.conticonnect.com/btdongle/eu/conformity
For details of FCC, see Page 2 „FCC Information".
You will find the Supplier's Declaration of Conformity at:
www.conticonnect.com/btdongle/us/conformity
For information on additional approvals, visit
www.conticonnect.com/downloads.
Manufacturer address:
Continental Reifen Deutschland GmbH
Büttnerstraße 25
30165 Hanover
Germany
EN
15