BURNER FL AME CHECK
01. Light burners and rotate knobs
from high to low. When knob is
at high, flames should be larger
than when knob is at low.
02. Perform burner flame check
by looking below griddle top
on the side of unit to view
burners below.
03. Always check burner flame
before use.
If there is a sudden drop or low
flame issue, please reference the
Troubleshooting chapter.
For additional support, see youtube.
com/blackstonegriddles
Care & Maintenance
MATCH LIGHTING
INSTRUCTIONS
Before beginning, if your unit uses
a 20lb. Propane Tank, check for
gas leaks. (Please reference the
Leak Test Instructions section of
the Fuel | Propane - 20lb. Tank
chapter.)
01. Ensure control knob is in
OFF position.
02. Remove griddle top.
03. Light a match (or long lighter)
no shorter than 11 inches long.
Place the flame on the right or
left side of the burner.
04. Push in and turn the control
knob to the HIGH position.
Ensure burner lights and
stays lit.
| Owner's Manual | Model 1858
Healthy flames might have a few
flickers of yellow color ❶, then a
dark blue color ❷, followed by a
vibrant blue by the burner tube ❸.
❶
❷
❸
15