Zoeller 1104-0082 Manual De Usuario página 4

PREPARATION
Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Installation Time: 2 hours
Tools Required for Assembly (not included): tape measure, pipe tape, hacksaw, flathead
screwdriver, 2-step PVC glue system (primer and sealer).
Parts Required For Standard Assembly (not included): 2 in. slip by NPT coupling, 1-1/2 in. slip by
NPT coupling, drain pipe, compression fitting for 1-1/4 in. drain pipe, PVC pipe and fittings as required
to complete installation, additional check valve as required by codes.
GENERAL PUMP USES
This pump system can be used in the following installations:
1. Wet bar sink pump
2. Laundry tray pump
1
2
Vent Pipe
4
Vent Pipe
Discharge Pipe
Inlet Pipe
Discharge
Pipe
Laundry
Tray Sink
Washer
Inlet
Pipe