Zoeller 1104-0082 Manual De Usuario página 6

2. Thread 1-1/2 in. coupling (not included) into the
discharge opening at the top of the pre-assembled
pump system.
3. Attach rigid 2 in. vent pipe (not included) to the vent pipe
coupling according to local, regional, and state codes.
4. Attach rigid 1-1/2 in. discharge pipe (not included)
to the discharge pipe coupling according to local,
regional, and state codes. Plumb into existing drain
pipe per local, regional, and state codes. Use check
valve (not included) as required by codes.
2
3
4
6
Discharge
Opening