Bigben RR50 Manual De Instrucciones página 15

and then enter music select mode.
Buzzer as system alarm sound, if you'd like to use buzzer as alarm sound, press
1
to enter radio mode, and then press press [
nember, you can press [SCAN +] or [SCAN - ] to search the radio frequency too, when
you selected you liked radio frequency, press
Hold the 2s to set the AL2, the setting method same as AL1.
2
NOTE:
In the alarm setting mode, without pressing any button for 1 minutes, it will automatically
return to the clock, and the current setted data will take effect.
In the radio mode, the alarm setting can not be work.
Buzzer as system default alarm, when the alarm time is go on, the buzzer or radio will
ring. If choose radio as alarm, the alarm volume will same as the last listend radio
Choosed buzzer as alarm sound:
When the alarm is sounding, press the [SNOOZE] button, the alarm will turn off for 5
minutes, then the alarm will sound again, repeat will continue 5 times.
When the alarm is sounding, if not any key is pressed, it will turn off after sounding for 1
minute and repeat after 1 minute, repeat will continue 5 times, then stop.
Choosed radio as alarm sound
Within 30 minutes, press the SNOOZE button, the alarm radio will be turn off and will
be turn on after 5 minutes.after 30 minutes or press the [SNOOZE] button 5 times,the
snooze mode will be stop. press any key to stop the alarm or after 1 hour will be auto
stop the alarm.
When the alarm is ringing, press any key except [SNOOZE], it will be turn off the alarm.
In snooze mode, if you have enter setting state, then will exit snooze process.
5. Volume adjust
The volume control must be set to a suitable volume.
Press [
15 levels in total.
'd like to select radio as alarm sound, touch [
] to select the saved radio station
1
-15-
GB
]