EN
Operating the appliance
Plug the appliance into the mains using the power cable (Figure 4).
The appliance beeps and the pre-programmed setting indicator
lights flash in turn.
NOTES:
•
For recipes that include meat, please note you should cook the meat
beforehand.
•
You are recommended to place vegetables in the jug first.
•
The jug has a maximum capacity of 1400 ml.
Selecting a setting
Press the Settings button, as many times as needed to select the
setting you wish to use. The indicator light flashes to display the
selected setting.
Press the ON/OFF button to start the appliance.
NOTES:
•
To cancel a setting, press and hold the ON/OFF button for some seconds. Then
select another pre-programmed setting by pressing the Settings button.
•
When the pre-programmed setting has finished, the appliance beeps for 1
minute and all the indicator lights flash. Then, the appliance automatically
switches to standby mode.
•
If you remove the motor unit while the appliance is in use, it stops immediately.
10