Changing The Sound And Display Settings - Sony CDX-C4850R Manual De Instrucciones

Changing the sound and
display settings
The following items can be set:
•CLOCK (page 6).
•CT (Clock Time) (page 16).
•D.INFO (Dual Information) - to display the
clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).
•AMBER/GREEN - to change the illumination
colour to amber or green. (CDX-C4850R/
C4840R only)
•DIM (Dimmer)-to change the brightness of
the display. (CDX-C4850R/C4840R/4260R/
4250R/4240R only)
— Select "ON" to dim the display.
•BEEP - to turn on or off the beeps.
•RM (Rotary Commander) - to change the
operative direction of the controls of the
rotary commander.
— Select "NORM" to use the rotary
commander as the factory-set position.
— Select "REV" when you mount the rotary
commander on the right side of the
steering column.
•M.DSPL (Motion Display) - to turn the
motion display on or off.
•A.SCRL (Auto Scroll) (page 8, 21).
(CDX-C4850R/C4840R only)
Note
If you connect an optional power amplifier and do
not use the buit-in amplifier, the beep sound will
be disabled.
1
Press (SHIFT).
2
Press (2) (SET UP) repeatedly until the
desired item appears.
Each time you press (2) (SET UP), the item
changes as follows:
CLOCK n CT n D.INFO* n AMBER/GREEN n
DIM n BEEP n RM n M.DSPL n A.SCRL*
* When no CD or MD is playing, this item will
not appear.
Note
The displayed item will differ depending on
the source.
3
Press (4) (n) to select the desired
setting (Example: ON or OFF).
4
Press (SHIFT).
After the mode setting is complete, the
display returns to normal playback mode.
19