Hunter 44668 Manual Del Usuario página 24

Step 4 ■ Press again to change to the program temperature. The cur-
program
rent temperature will be flashing.
■ Press to change the temperature.
or
Step 5 ■ Press to select Auto or On for each program. "Auto" will auto-
fan
matically cycle your system to maintain your set temperature.
"On" will run your system continuously. "Auto" is the default
setting.
Step 6 ■ (Does not apply to thermostat model 44660) Press to select
sensor
the sensor that will control each thermostat program, either
for sensor 1,
The thermostat can also be configured to take an average of
any combination of the three.
program
Step 7 ■ Press again to move to the next program number.
■ Repeat Steps 3 through 5 to change the remaining Weekday
programs.
for sensor 2, or for the thermostat.
2
24
1