Filter Monitor - Hunter 44668 Manual Del Usuario

Filter Monitor

Your thermostat also keeps a record of the number of hours your filter has been in use. To maximize your system's
performance and energy efficiency, change or clean your filter regularly.
■ When the total system run time for heat and cool reaches 500
hours, "FILTER" will alternate on the display with the day to
remind you to clean or change your system's filter. "FILTER"
will continue to display until the counter is set back to zero.
■ Press to review total filter usage. After 15 seconds, the dis-
filter
play will return to normal mode, or you can hit RET CLEAR
to exit immediately. The Filter Monitor will display up to 999
hours and 59 minutes of usage.
■ To reset the Filter Monitor counter, hold for 3 seconds.
ret/clear
The display will blink, and the counter will be reset to zero.
41