GE Pedestal Instrucciones De Instalación página 3

5
Using two or more people, carefully lift the
washer or dryer onto the pedestal, tilting the unit
back slightly.
6
Set the unit down onto the pedestal making
sure the base of the unit is behind the front
brackets of the pedestal and align bracket hole
with base mounting hole.
Base of
the unit
7.a
For the washer, align the holes in the rear
of the washer with the slots of the rear brackets
on the pedestal.
Washer
NOTE: If slots or mounting holes do not align,
make sure the washer or dryer leveling legs are
adjusted fully into the unit. Turn each leg tight to
the base.
7.b
For the dryer, engage the slots in the
rear of the dryer with the tabs of the rear
brackets on the pedestal.
Dryer
8
Align the sides of the washer with the sides
of the pedestal and secure the washer to the
rear brackets using four #10 screws (2 per
bracket).
9
With the pedestal drawer open for better
access, install a #10 screw through each front
bracket on the pedestal into the base of the
washer or dryer.
NOTE: If front mounting holes are not present on
washer base, drill them out with a 5/32" drill bit.
3 134863010A
(0705)