GE Pedestal Instrucciones De Instalación página 4

10
Close the pedestal drawer and carefully
move the washer/pedestal or dryer/pedestal
assembly into its final position.
NOTE: Because of the increased weight
caused by the addition of the pedestal, two or
more people may be required.
11
Refer to the Installation Instructions that
came with the washer or dryer to properly
complete electrical, water, drain and venting
connections. If questions arise, please refer to
the Owner's Guide that came with the washer
or dryer for contact information.
12
Excessive noise and vibration can be
prevented by properly leveling the
washer/pedestal or dryer/pedestal assembly
on a SOLID floor and tightening the leveling
leg lock nuts.
With the washer/pedestal or dryer/pedestal
assembly in its final position, place a level on the
top of the unit. Adjust the pedestal leveling legs
so the assembly is level front-to-rear and side-to-
side, and stable corner-to-corner. Press down
on alternate corners and sides and feel for the
slightest movement. Adjust the appropriate leg
so the assembly is SOLID on the floor on ALL
four pedestal legs. After leveling the assembly,
adjust the lock nut on each pedestal leveling leg
against the pedestal base and tighten with a
wrench. Keep the leg extension at a minimum to
prevent excessive vibration.
4 134863010A
(0705)