KTM 64112966000 Manual De Instrucciones página 5

Scope of supply
1x KTM MY RIDE control unit
1x rubber strap
Assembly
- Remove screws .
- Remove screws with the bushings.
- Detach the fuel tank fairing in area and take off to the rear.
- Mount KTM MY RIDE control unit (included) with rubber strap
on the bracket.
- Join plug-in connector .
NOTE
The socket connector is located behind the frame cover and must
fi rst be exposed if necessary.
- Mount and position the fuel tank fairing in area .
- Mount screws with the bushings and tighten to 5 Nm.
NOTE
Screws can be secured with Loctite 243 if necessary.
5