Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALL SKEWER.
Insert the shaft while applying
pressure to the pod cover.
Skewer direction is your choice:
Consider lock access.
INSTALL TRAY END CAP.
• Lift the tab upward and push the cap
into place.
• Release the tab after the cap is fully
engaged to the tray end.
• Make sure the cap is engaged.
1033568C - 3/18
Hold the shaft at the far end. Join the handle
with the shaft, turn the shaft counter-clockwise.
Load your bike.
Set the bicycle forks
vertically onto the skewer.
Prevent damage to
your forks!
Use extra caution when installing, or
removing bikes with CARBON FIBER
FORKS. Fork tips can crack, or bend if
bike is not loaded vertically.
NOTE: Adjustment knob will turn with shaft.
With lever open,
tighten adjustment
knob clockwise until
the lever closes with
FIRM resistance.
NOTE: Shaft will turn
with adjustment knob.
Publicidad
