Publicidad
Idiomas disponibles
Idiomas disponibles
CLOSE THE LEVER.
It should close with FIRM RESISTANCE against the forks.
Your bike's forks are
secure oNlY after
the lever closes with
SolID RESISTANCE.
SECURE THE REAR WHEEL.
Pull the strap
through wheel
spokes.
SNAPAROUNDS...
If you have square
bars, loosen the
tabs by bending
them repeatedly.
1033568C - 4/18
TEST YOUR
INSTALLATION! If forks
can move in the mount,
open the lever and
tighten the adjustment
knob more.
Insert the strap
end behind the
red button.
Tighten strap by
lifting the red tab up.
Remove the tabs with
scissors or pliers.
LOCK THE COPPERHEAD.
• SKS ® Lock Cores are optional.
• To install SKS ® Lock Cores,
refer to lock instructions.
• To purchase lock cores visit
www.yakima.com or your local
Yakima dealer.
Check your wheel
and tighten the
strap if necessary.
Continue to step 3 of accessory instructions...
Release the
strap by pushing
the button.
Publicidad
