Maintenance; Troubleshooting - Hammerhead HLCL04 Manual Del Usuario

MAINTENANCE

This Laser Line Level has been designed to be a low-maintenance tool. However,
in order to maintain its performance, you must always follow these simple
directions:
a. Avoid exposing the tool to shock, continuous vibration or extreme hot or
cold temperatures.
b. Always store the tool indoors.
c. Always keep the tool free of dust and liquids. Use only a clean, soft cloth
for cleaning. If necessary, slightly moisten the cloth with pure alcohol or a
little water.
d. Do not disassemble the Laser Line Level; this will expose the user to
hazardous radiation exposure.
e. Do not attempt to change any part of the laser lens.

TROUBLESHOOTING

PROBLEM
The laser line
projection is weak.
The laser line is
hard to see.
Laser line is not
projected.
LASER LINE LEVEL
CAUSE
Batteries are weak.
The tool is too far from the
target.
No batteries installed or
batteries are depleted.
The power switch is not
pressed to the "ON" position.
SOLUTION
Replace with new
batteries.
Move the tool closer to
the target.
Install new batteries.
Press the power switch
to the "ON" position.
11