Protecting The Environment - Black and Decker BEMW461ES Manual De Instrucciones

Your charger does not require any maintenance apart from
regular cleaning.
Regularly clean the ventilation slots in your tool/appliance
u
and charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Regularly use a blunt scraper to remove grass and dirt
u
from the underneath of the guard.
Troubleshooting
If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local BLACK+DECKER repair agent.
Warning! Before proceeding, release the bail bar to turn
mower off and wait for the blade to stop.
Problem Possible cause Possible solution
Mower will Cord is not
not start.
plugged in.
Circuit fuse is
blown.
Cord or switch
is damaged.
Grass too long.
Machine func- Thermal cut out
tions intermit- activated.
tently.
Machine Height of cut
leaves ragged too low.
finish or mo-
Cutting blade
tor labours.
blunt.
Underside
of machine
clogged.
Blade fitted
upside down.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Plug mower into a work-
ing outlet.
Replace circuit fuse. (If
the product repeatedly
causes the circuit fuse
to blow, discontinue use
immediately and have
itserviced by an author-
ised BLACK+DECKER
service center.
Have cord or switch
replaced at an author-
ised BLACK+DECKER
service center.
Increase the height of
cut and move machine
to shorter grass to start.
Allow motor to cool and
increase height of cut.
Increase height of cut.
Replace the blade.
Check underneath the
machine and clear out
as necessary (always
wear heavy duty gloves)
Refit blade correctly.
(Original instructions)
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
BEMW461ES
Voltage V
AC
W
Power inpurt
No-Load
-1
min
speed
Height
mm
adjustment
cm
Blade length
Kg
Weight
Hand/arm weighted vibration value:
= 2.5m/s 2 , uncertainty (K) = 1.5m/s
Sound pressure level at the operator's ear:
L : 82dB(A); K= 2.1dB(A)
PA
Sound power level L
EC declaration of conformity
MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
%
BEMW461ES, BEMW471ES, BEMW481ES lawn mower
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60335-1:2012 + A11:2014,
EN 60335-2-77:2010
2000/14/EC, Lawn Mower, L < 50cm, Annex VI,
DEKRA Certification B.V. Meander 1051 / P.O. Box 5185
6825 MJ ARNHEM / 6802 ED ARNHEM Netherlands.
Level of accoustic power according to 2000/14/EC (Article 12,
Annex III, L< 50cm):
measured sound power level L
guaranteed sound power level L
These products also comply with directive 2014/30/EU,
2011/65/EU. For more information, please contact Black &
Decker at the following address or refer to the back of the
manual.
ENGLISH
BEMW471ES BEMW481ES
230 230
1400 1600
3500 3500
20 - 70 20 - 70
34 38
14.37 15.14
2 .
: 95dB(A); K= 1.3dB(A)
WA
: 95dB(A); K= 1.3dB(A).
WA
: 96dB(A).
WA
230
1800
3500
20 - 70
42
16.31
15