Maintenance And Disposal - Silverline 123339 Manual Del Usuario

123339

Maintenance and Disposal

Replacement brushes
• Over time, the carbon brushes in the motor will wear away. This
wear process will be accelerated if the machine is used in dusty
environments, or if the machine is overloaded.
• If the brushes have become excessively worn; motor performance may
decrease, the machine may fail to start, or excessive sparking may be
observed.
• If you suspect that the brushes may be worn, have them replaced at
an authorised service centre.
This Silverline product comes with a 3 year guarantee.
To qualify you must register this product at silverlinetools.com within 30
days of purchase. The guarantee period begins on the date of purchase as
detailed on your sales receipt.
This Guarantee and guarantee period becomes effective at the date of retail
purchase as detailed on your sales receipt.
PLEASE KEEP YOUR SALES RECIEPT
If this product develops a fault within 30 days of purchase, return it to the
stockist where it was purchased, with your receipt, stating details of the
fault. You will receive a replacement or refund.
If this product develops a fault after the 30 day period, return it to:
Silverline Tools Service Centre
PO Box 2988
Yeovil
BA21 1WU, UK
The guarantee claim must be submitted during the guarantee period.
You must provide the original sales receipt indicating the purchase date, your
name, address and place of purchase before any work can be carried out.
You must provide precise details of the fault requiring correction.
All claims will be verified by Silverline Tools that the deficiencies are of a
material or manufacturing fault within the guarantee period.
We do not refund carriage. All products should be in a suitably clean and
safe state for repair, and should be packaged carefully to prevent damage or
injury during transportation. We may reject unsuitable or unsafe deliveries.
All work will be carried out by Silverline Tools or its authorised repair agents.
The repair or replacement of the product will not extend the period of
guarantee.
Defects recognised by us as being covered by the guarantee shall be
corrected by means of repair of the tool free of charge (excluding carriage
charges) or by replacement with a tool in perfect working order.
Retained tools, or parts, for which a replacement has been issued, will
become the property of Silverline Tools.
Silverline Tools Guarantee
Registering your purchase
Registration is made at silverlinetools.com by selecting the Guarantee
Registration button. You will need to enter:-
• Your personal details
• Details of the product and purchase information
Once this information is entered your guarantee certificate will be created in
PDF format for you to print out and keep with your purchase.
Terms & Conditions
The repair or replacement of your product under guarantee provides benefits
which are additional to and do not affect your statutory rights as a consumer.
What is covered:
The repair of the product, if it can be verified to the satisfaction of the
Silverline Tools that the deficiencies were due to faulty materials or
workmanship within the guarantee period of purchase.
If any part is no longer available or out of manufacture, Silverline Tools will
replace it with a functional replacement part.
Use of the product in the EU.
What is not covered:
Silverline Tools does not guarantee repairs required as a result of:
Normal wear and tear caused by use in accordance with the operating
instructions eg blades, brushes, belts, bulbs, batteries etc.
The replacement of any provided accessories drill bits, blades, sanding
sheets, cutting discs and other related items.
Accidental damage, faults caused by negligent use or care, misuse, neglect,
careless operation or handling of the product.
Use of the product for anything other than normal domestic purposes.
Change or modification of the product in any way.
Use of parts and accessories which are not Silverline Tools genuine
components.
Faulty installation (except installed by Silverline Tools).
Repairs or alterations carried out by parties other than Silverline Tools or its
authorised repair agents.
Claims other than the right to correction of faults on the tool named in these
guarantee conditions are not covered by the guarantee.
www.silverlinetools.com
115mm Angle Grinder
Cleaning
• Disconnect the machine from the mains supply before cleaning.
• During use dust, or metallic particles, will accumulate on the machine.
Always clean dust / particles away, and never allow ventilation holes to
become blocked. Use a soft brush, or dry cloth to clean the machine,
if available blow through the ventilation holes with clean, dry,
compressed air.
Disposal
• Do not dispose of power tools, or other waste electrical and electronic
equipment (WEEE), with household waste.
• Contact your local waste disposal authority for information on the proper
way to dispose of power tools.
7