Motorola Solutions PMMN4089 Manual Del Usuario página 7

68012008093_PMMN4089.book Page 5 Wednesday, May 15, 2013 2:56 PM
holes.
3. Use the two self tapping screws
provided to mount and secure the hang-
up clip.
Plugging the Connector to the Radio
1. Place the microphone connector as
shown in Figure 3.
2. Push the connector into the radio female
connector until a click sound is heard.
Note: The digital symbol on the microphone
rubber boot should be facing to the top
while attaching to the radio.
Figure 3. Location of Digital Symbol on
microphone connector rubber boot
Radios with this "Digital Symbol" are digital
Digital Symbol
Rubber Boot
5