Conformity To Regulations - V2 ELETTRONICA PRGU433PP Manual De Instrucciones

• The automated vehicular gates shall comply with the following rules: EN 12453,
EN 12445, EN 12978 as well as any local rule in force.
• Also the automation upstream electric system shall comply with the laws and
rules in force and be carried out workmanlike.
• The door thrust force adjustment shall be measured by means of a proper tool
and adjusted according to the max. limits, which EN 12453 allows.
• We recommend to make use of an emergency button, to be installed by the
automation (connected to the control unit STOP input) so that the gate may be
immediately stopped in case of danger.

CONFORMITY TO REGULATIONS

V2 ELETTRONICA SPA declares that PRGUxxxxx is in conformity with the provisions of
the followings 93/68/EEC, 73/23/EEC, and with the standards referenced here below:
EN 60335 - 1:
ELECTRICAL SAFETY:
ETS 300 683: ELECTROMAGNETIC COMPATIBILITY
EN 300 220 - 3: OFFICIAL USE OF THE SPECTRUM
Racconigi, 22/05/2001
V2 ELETTRONICA SPA legal representative.
A.Livio Costamagna
13