V2 ELETTRONICA PRGU433PP Manual De Instrucciones página 23

1. Power supply phase wire 230VAC - 50Hz / 120VAC - 60Hz
2. Power supply neutral wire 230VAC - 50Hz / 120VAC - 60Hz
3. Motor common wire 1
4.
Power supply output for motor 1 during the opening
5.
Power supply output for motor 1 during the closing
6.
Motor common wire 2
7.
Power supply output for motor 2 during the opening
8.
Power supply output for motor 2 during the closing
9.-10.
Flasher 230VAC - 40W / 120VAC - 40W
11.-12.
Power supply output 24VAC for photocell and other accessories
Opening command for connecting the key panel or the unlock key.
13.
Normally open contact (indicator L2)
14. STOP command. Normally closed contact (indicator L3)
15. Common wire (-)
16. Photocell. Normally closed contact (indicator L4)
17. Opening limit switch. Normally closed contact (indicator L5)
18. Closing limit switch. Normally closed contact (indicator L6)
19.
Antenna cable shield
20.
Antenna cable core
STATUS INDICATORS OF THE UNIT INPUTS
L1
Programming
L2
Lights up when a pulse is received at the START input terminal
L3
Goes out when a pulse is received at the STOP input terminal
L4
Goes out when a pulse is received at the PHOTOCELL input terminal
L5 Goes out when a pulse is received at the opening limit switch input terminal
L6
Goes out when a pulse is received at the closing limit switch input terminal.
19